Thermador ranges with Star burners are a familiar sight in Encino's newer kitchens. When a burner won't ignite, clicks after cleaning, or the oven won't hold temperature, ChantaFix repairs gas and dual-fuel Thermador ranges across Encino.
Thermador's Star burner has a five-point shape that spreads flame across the pan, and many models add ExtraLow simmer on select burners. ExtraLow works by cycling the flame on and off automatically, which surprises owners who haven't seen it before.
02 /
Common Thermador range problems
Steam oven problems on Pro Grand Steam: Steam ovens need periodic descaling. If descaling doesn't restore normal operation, we test the pump and sensors.
Griddle not heating: A griddle that runs cold or hot usually has a thermostat or heat-source problem. We check both.
Uneven flames or noisy burners: If flames lift, turn yellow, or look uneven around the star, we clean and inspect the burner, check cap placement, and verify the gas supply.
ExtraLow burner turning on and off: If an ExtraLow burner goes out and relights by itself on the lowest settings, it's doing what it was designed to do. A burner that goes out on higher settings, or won't relight, is a different matter and worth a visit.
Constant clicking after cleaning: Clicking that won't stop, or clicking with the knob off, often follows a spill or a cleaning. If drying and reseating the burner cap doesn't fix it, we test the switches and the spark module.
Burner won't ignite: A Star burner that won't light can have a dirty or cracked electrode, clogged ports, a misplaced cap, or a gas supply issue. If it lights with a match but not on its own, the ignition side is at fault.
03 /
Gas safety first
Safety first: if you smell gas, don't use any switches or burners. Leave the house and call your gas utility or 911 from outside.
04 /
Quick checks before you book
A few things worth checking before you book:
Remember that ExtraLow burners cycle on and off at the lowest settings by design.
After cleaning, let Star burners dry completely and check that each cap sits correctly.
Note whether the oven problem happens in bake, convection, broil or steam modes.
05 /
Range access and installation in Encino
Pro-style ranges in Encino homes are heavy and connected to a gas line, and many sit under a large hood against a finished backsplash. If a range has to be pulled forward for access, we protect the floor and surrounding finishes, and we check the gas connection for leaks before we leave.
Encino covers two ZIP codes, 91316 and 91436, with hillside streets south of Ventura Boulevard, the Royal Oaks area and gated communities such as Amestoy Estates. Share gate details and parking instructions when you book so the visit starts on time.
06 /
Repair or replace?
We'll explain what failed and whether parts are available for your model before any work starts.
07 /
Warranty and independent service
Every repair comes with a 90-day workmanship warranty, and the parts we install carry a 1-year warranty.
Chantafix LLC, California BHGS Appliance Service Dealer Registration No. A-51707. ChantaFix is an independent appliance repair company based in Glendale, California. We are not affiliated with or endorsed by Thermador or BSH Home Appliances. Thermador is a trademark of its owner and is used here only to identify the appliances we repair.
08 /
Neighborhoods and ZIP codes we serve in Encino
We take Thermador range repair requests from Encino homes in the hillside streets south of Ventura Boulevard, Royal Oaks and Amestoy Estates, covering ZIP codes 91316 and 91436. If you are not sure whether your street is included, enter your ZIP when you book or ask us, and we will confirm.
INDEPENDENT BRAND SERVICE
Thermador
ChantaFix is an independent service company, not an authorized manufacturer representative. Confirm your specific model and parts availability with the team.
FROM SYMPTOM TO NEXT STEP
How a repair starts.
01
Tell us what happened
Choose your appliance and problem. Add the model, service address and an optional preferred date and time.
02
Confirm the visit
The team checks the location, scope and timing. A received request is not yet a confirmed appointment.
03
Review the proposed work
Discuss the findings and written repair estimate before approving work. Parts and any follow-up visit depend on the assessment.
CALIFORNIA · GLENDALE BASE
Check your service ZIP.
Our California service list contains these 99 ZIP codes. We confirm the physical address, access and appointment individually; a listed ZIP does not mean every address in its city is covered.
Check locally; no contact details are sent.
Listed California ZIP codes
90004
90005
90006
90010
90019
90020
90024
90025
90026
90027
90028
90029
90035
90036
90038
90039
90041
90042
90046
90048
90049
90065
90067
90068
90069
90073
90077
90095
90210
90211
90212
91001
91006
91007
91011
91020
91024
91030
91040
91042
91046
91101
91103
91104
91105
91106
91107
91201
91202
91203
91204
91205
91206
91207
91214
91301
91302
91303
91304
91306
91307
91311
91316
91324
91325
91326
91330
91331
91335
91340
91342
91343
91344
91345
91352
91356
91364
91367
91371
91401
91402
91403
91405
91406
91411
91423
91436
91501
91502
91504
91505
91506
91601
91602
91604
91605
91606
91607
91608
USEFUL BEFORE YOU BOOK
Your questions, answered.
Useful details for range in California.
Why is my oven slow to preheat?
On gas ovens, the igniter or gas valve; on dual-fuel models, an element, sensor or control. We test to find out.
What should I have ready?
The model and serial number, whether it's gas or dual-fuel, and which burners or oven functions are affected.
Do your repairs come with a warranty?
Yes. Every repair comes with a 90-day workmanship warranty, and the parts we install carry a 1-year warranty. If the same problem comes back within that time, call us and we will come back to check it.
Will it take more than one visit?
If a part is needed, we order it for your model and return to install it.
Do you repair gas and dual-fuel Thermador ranges?
Yes, including Pro Grand and Pro Harmony ranges, as well as induction models.
Is it normal for my ExtraLow burner to turn on and off?
Yes. ExtraLow cycles the flame automatically at the lowest settings to hold a gentle simmer, and the igniter sparks when it relights.
Why does my Star burner keep clicking after cleaning?
Moisture trapped around the ignition points is common. Let it dry fully and check the cap; if clicking continues, the spark switch or module may need service.
Does Valley heat really affect my refrigerator?
It can. High room temperatures make the condenser and fans work harder, so a dirty condenser or weak fan shows up faster in summer.